|
|
|
DYMAX - UV & visible light curing adhesives, coatings,
sealants and gaskets. Light curing systems.
|
|
Equipment Catalogue
| Equipment Catalogue in pdf format (click Icon to open) |
 1,703 Kb |
Medical Adhesives
|
DYMAX MD Medical Device Adhesives
UV Adhesives for Medical Device Assembly
Description:
 DYMAX MD Medical Device Adhesives are light curing and fluorescing adhesives which significantly reduce your assembly processing costs. DYMAX MD adhesives cure upon exposure to visible and UV light resulting in cure time reductions up to 50%.
UV/visible light curing technology also permits bonding of UV inhibited and tinted plastics. In-line inspection of the adhesive bond is made possible with our Ultra Fluorescing technology.
DYMAX solvent-free adhesives provide reliable, cost saving assembly solutions for medical device manufacturing.
| See-Cure Medical Device Adhesives |
|
| Adhesive |
Typical Application |
Viscosity |
Recommended Substrates |
| DYMAX 1201-M-SC |
Medical devices; plastic assembly; tube sets; reservoirs; catheters |
450 cP |
PC, PVC, PU, ABS, PET, PEBA |
| DYMAX 1202-M-SC |
Medical devices; plastic assembly; tube sets; metal to plastic assembly; catheters; reservoirs |
300 cP |
PMMA, PA, PC, PU, PVC, PET, stainless steel |
| DYMAX 1204-M-SC |
Medical devices; plastic assembly; tube sets & fittings; face masks; tracheal tubes |
12,000 cP |
PVC, PU, ABS, PC, EVA | | | |
| Medical Adhesives in pdf format (click Icon to open) |
543 Kb |
Decorative and Industrial Glass Adhesives
| Product |
Applications |
Features |
| 401 |
Crystal assembly; glass furniture bonding; adhering metal brackets to glass |
Excellent adhesion to glass and metal; low viscosity; very good moisture resistance; good for close fitting parts |
| 424A |
Glass bonding; lead crystal chandelier and figurine assembly |
Crystal clear bonds; excellent adhesion to crystal; moderate flowing viscosity |
| 425 |
Glass stemware bonding; fountain assembly |
Dishwasher safe; water clear; low viscosity; exceptional tensile strength; good vibration and impact resistance |
| 429 |
Bulletproof glass bonding; glass, plastic and metal bonding; glass laminating; glass trophy assembly |
Resists yellowing, vibration and thermal shock; optically clear; general purpose bonding, potting and sealing; for large area bonding |
| 488 |
Sealing glass |
Extremely flexible; high degree of moisture resistance; good glass adhesion to difficult to bond to plastics |
| 4-20418 |
Bonding glass to acrylic; mirror assembly |
Cures through UV blocked and tinted glass and plastics; resists yellowing in the sun; good performance during thermal cycling; low stress |
| 4-20586 |
Epoxy for bonding glass to metal and plastic |
Hard, clear bonds; slick surface; resists yellowing when heated; good cure depth |
| 4-20623 |
Gap filling of non-flat, irregular and handmade glass; laminating large, thin glass sheets |
High transmission across the optical spectrum; low stress laminating; Newtonian viscosity minimizes air bubbles in the bond line |
Multi-Cure®
602 Rev A |
Bonding glass to aluminum, steel, plated metal and thermoset plastics; potting |
Cures with heat, light or pre-applied activator; tough, resilient bonds; can be used for coil terminating, unitizing and tamperproofing adjustment screws |
| Multi-Cure® 620 |
Bonding glass to aluminum, steel, plated metal and thermoset plastics; potting |
Good impact and moisture resistance; clear bonds; cures with heat, light or activator; wide range of viscosities; general purpose |
| Multi-Cure® 621 |
Glass/metal bonding to phenolic and filled plastics |
High tensile strength; suited for rigid adhesive applications; clear, hard bonds; cures with UV light, heat or pre-applied activator |
Multi-Cure®
625 SV01 Rev A |
Glass, metal, plastic bonding; adhering plastic lenses to eyeglass frames; bonding leads to glass headlamps and latches to windows |
Flexible and resilient; bonds can withstand strains caused by different coefficients of expansion that can be present when bonding dissimilar substrates; cures with UV light, heat or pre-applied activator |
| 6-20353 |
Glass cationic epoxy and encapsulant |
Clear, rigid bonds; low shrinkage; cures upon exposure to low intensity UV light; good for bonding and coating applications where resilience and toughness are required to resist mechanical and environmental shock |
*Substrate testing for 424A, 4-20263, 4-20651 and Multi-Cure® 619 and 620 has not yet been completed; please contact DYMAX Technical Service for specific recommendations.
Plastic Bonding Adhesives
| Product |
Applications |
Features |
| 3013 |
Bonding transparent or translucent acrylic, metal, polycarbonate, PVC alloys, ABS, polyurethane and polystyrene |
Resilient; general purpose; low viscosity; moisture resistant; flexible; dispenses easily and cures quickly for precise quantity and placement of adhesive; built-in fluorescence provides a method to insure in-line quality control utilizing optical scanners |
| 3015 |
Flexible plastic assembly; rapid bonding and sealing to stainless steel, polycarbonate, PVC |
Excellent moisture resistance and dispensing rheology for the most demanding applications; bonds to polycarbonate generally exceed the strength of the substrate; fluorescing for visual or automated inspection |
| 3016 |
Coating components; excellent adhesion to metal, nickel, glass, FR-4, polyimide, PVC and other plastics |
Clear, tough, rigid cationic epoxy coating; cures upon exposure to low intensity UV light; good for applications requiring chemical and high temperature resistance or exceptionally tack-free surfaces; full cure and optimum bond strength may continue to improve for 24 hours after exposure to UV light |
| 3017 |
Bonding to polysulfone, polycarbonate, PVC, PET, PETG, polyurethane, SAN and acrylic |
Flexible plastic bonder; fluorescent for visual or automated inspection; solvent-free; 100% solids; extremely fast curing |
| 3019 |
Flexible and rigid plastic bonding; adheres to PVC, polyurethane, PET, polystyrene, nylon |
Moisture resistant, clear bond lines; fluorescing for in-line inspection under low intensity "black" light; 100% solids; fast curing |
| 3020 |
Rapid polycarbonate bonding; bonds to PVC, polyimide and a variety of plastic substrates |
Low outgassing; tough; high strength; designed to form durable, water resistant bonds to polycarbonate |
| 3021 |
High strength UV epoxy; bonds glass, various plastics and most metals |
Low shrinkage (<0.2%); resists yellowing; maintains dimensions with minimal degradation of strength when thermally cycled; cures fully in seconds upon UV/visible light exposure, but heating the cured product to 150oC for 1 hour will increase the Tg to 100oC and may further improve bond strength |
| 3069 |
Electrical bonding; potting; wire harness assembly; bonds to polycarbonate, PVC, polyurethane, PET |
Low stress; clear; environmentally resistant; adheres to most surfaces; good for flexible and rigid substrates |
| 3070 |
Bonding rigid fittings to flexible tubing; adheres to PVC, SAN, PBT, polycarbonate, styrene mylar |
High water and moisture resistance at elevated temperatures; NVP-free; flexibility provides shock absorbing capabilities in the bond area |
| 3072 |
Electrical potting and sealing; bonds to PBT, Valox®, metal, glass, PVC, SAN, PS and K-Resin® |
UV and/or visible light curing; dispenses easily to allow for precise quantity and placement of adhesive; bonds generally exceed the strength of substrates bonded, including PVC alloys, which resist most other bonding methods |
| 3073 |
Potting and sealing; great for ceramic, metal PEI, polyimide and FR-4 and PC board assembly |
Fast curing; flexible adhesion to many substrates; good electrical properties; high strength, tough and resilient |
| 3081-LV |
Sealing PVC clamshell packages |
Strong bonds to thermoformed PVC; Viscosity = 380 cP |
| 3081 |
Sealing PVC clamshell packages |
Strong bonds to thermoformed PVC; Viscosity = 500 cP |
| 3081-T |
Sealing PVC clamshell packages |
Strong bonds to thermoformed PVC; Viscosity = 6,000 cP |
| 3083 |
Sealing PET & R-PET clamshell packages |
Strong bonds to thermoformed PET and R-PET; Viscosity = 550 cP |
| 3086 |
Packaging; bonds to SAN, ABS, CAP, MBS, acrylic, glass, ceramic and metal |
Very fast; structural strength adhesive; hard, rigid bonds; UL94 flame class rating of 94V-0 |
| 3089 |
Laminating and bonding; adheres to PET, glass PETG, Mylar®, K-Resin®, PP and brass |
Low stress; very fast curing; flexible UV adhesive; resilient bonds exhibiting high flexibility to minimize or eliminate bond line stresses |
| 3093 |
Bonding plastic housings, polycarbonate, PSU, PU, PVC, styrene and acrylic |
Tough, environmentally resistant bonds; flexible with excellent tensile strength; resistance to thermal shock; available in a range of viscosities to suit most applications |
| 3094 |
Bonding display cases, shelves; laminating plastic sheets; packaging; bonds to acrylic, ABS, styrene, polycarbonate, polyurethane |
UV and/or visible light curing; dispenses easily and cures quickly for precise quantity and placement of adhesive; bonds generally exceed the strength of substrates bonded, including PVC alloys, which resist most other bonding methods |
Dome Coating Adhesives
| Product |
Applications |
Features |
| Dome Coatings - Rigid |
| 4-20564 |
Small polyester decals and pen tops |
Highest dome; resists yellowing |
| 4-20435 |
Pen top and small labels |
High dome |
| 4-20688 |
Plastic nameplates |
Medium dome; good adhesion to plastics |
| 4-20508 |
Plastic and metal nameplates |
Low dome; for fastest filling of bordered nameplates |
| Dome Coatings - Pliable & Flexible |
| 4-20650 |
Large decals (up to 1" x 8"); protect bar codes on plastics |
Medium dome profile |
| 4-20630 |
Medium decals (up to 1" x 2") |
Low dome profile |
| 4-20645 |
Anti-skid coating |
Not slick; won't slide; clear, UV curable rubber feet |
| Low and High Gloss Coatings |
| 4-20624 |
Protect decals |
Hard; low gloss (matte) finish |
| 4-20638 |
Protect decals and bar codes on plastics |
Hard; high gloss finish |
Conformal Coatings
Flexible; single component; 100% solids; fluorescing; excellent adhesion to a variety of metal, ceramic and glass-filled epoxy surfaces; low viscosity
| Product |
Applications |
Features |
| 984-LVUF |
Highly fluorescing for easy inspection; for densely populated circuit boards requiring shadow cure |
Hard; clear; fluorescing, environmentally resistant; tack-free surface; IPC UL and MIL Spec approved; moderately low viscosity; cures by UV light and secondarily with heat |
| 9-984-B |
Formulated for rapid room temperature cure when exposed to UV/visible light; excellent for hiding components and board features |
Hard; black; thin; low-gloss protective coating; adheres well to a variety of metal, ceramic and glass-filled epoxy surfaces |
| 9-986-F |
Formulated for maximum flexibility at low temperatures; easily penetrated by sharp electronic probes; easy re-work |
Flexible; single component; 100% solids; fluorescing; excellent adhesion to a variety of metal, ceramic and glass-filled epoxy surfaces; low viscosity |
| 9-984-LVF |
In-line curing up to 10 meters/minute |
Very fast curing; hard; glossy; fluorescing; 100% solids; retains a relatively high brilliant fluorescence after curing and will not fade |
| 9-20557 |
Forms tough, clear circuit encapsulant upon exposure to longwave UV/visible light; excellent for encapsulating, potting, sealing and bonding |
Flexible; resists yellowing, vibration, impact and thermal shock; excellent adhesion to most soldermasks and PCB materials; fluorescing; secondary heat cure capability; recommended for use with no-clean solder flux |
| 9-20676 |
Forms tough clear coating upon exposure to longwave UV/visible light; excellent for encapsulating, potting, sealing and bonding |
Performs well through vibration, impact and thermal shock testing; exhibits excellent adhesion to most solder masks; secondary heat cure capability |
Microelectronic Encapsulants
| Product |
Applications |
Features |
| 9001-E-v3.0 |
Thin coating, wicking and underfill |
Low viscosity; can be cured in shadow areas at 120°C |
| 9001-E-v3.1 |
Glob top |
Medium viscosity; can be cured in shadow areas at 120°C |
| 9001-E-v3.5 |
Precision application to specific electronic assembly areas |
High viscosity; can be cured in shadow areas at 120°C |
| 9001-E-v3.7 |
Precision application to specific electronic assembly areas |
Highest viscosity; can be cured in shadow areas at 120°C |
| 9008 |
Encapsulating on Flex/Polyimide |
High adhesion to polyimide to –40°C; flexible |
| 9-20558 |
Strain relief or chip encapsulation |
Flexible; moisture barrier for metal, ceramic, epoxy and glass filled plastics |
Electronic and Industrial Potting Compounds
| Product |
Applications |
Features |
| One Component Potting and Sealing Resin Systems |
| 921 |
Tamper proofing; potting connectors and thermal switches |
Translucent bonds; high adhesion to ABS, filled Nylon, metal and glass |
| 953 |
Potting sensors |
Flexible; excellent plastic bonder; bonds to ABS, PC, PVC and FR-4 |
| 954 |
Capacitor and inductor potting |
Resilient; bonds to Valox, PBT, PET and metal |
| 955-Rev. A |
Potting capacitors |
Resilient; bonds well to metal; FR-4 and ceramic |
| 959 |
Tamper proofing relay screws |
Flexible; general purpose; bonds to metal, phenolic and filled plastics |
| UV + Trigger Cure® Two Component Potting and Sealing Resin Systems |
| 960 A/B |
Potting sensors |
UL 94V-0 flammability rating |
| 961 A/B |
Heat sensor and detector potting |
UL 94V-0 flammability rating |
| 9-20685 A/B |
Potting LED arrays |
Good adhesion to polycarbonate |
LED Adhesives and Encapsulants
| Product |
Applications |
Features |
| 9614 |
Spray protection of LED arrays |
Low viscosity for easy spray application; protects LEDs and solder connections |
| 9615 |
Casting and potting |
Cures through UV transparent molds for consistent lens profile; potting without trapping air |
| 9616 |
Clear doming |
Transparent; non-yellowing; viscosity designed for dispensing and curing hundreds of lenses per minute |
| 9617 |
Doming |
Base resin for adding phosphors and dyes; non-yellowing |
Form In Place Gaskets.
| Product |
Applications |
Features |
| GA-101 |
Instant flange gasket for edge sealing of cavities being filled with hot two-part urethane and hot melt foams |
Firm gasket; designed for plastics, electroplated plastics and metals; resists deformation and tear at elevated temperatures |
| GA-103 |
Plating baths, fuel cells and filters |
Resistant to water, acid and bases; within product line, most chlorine resistant and highest temperature resistance; self-leveling fluid |
| GA-105 |
Automotive and appliance casings |
Soft, sticky gasket; good adhesion |
| GA-107 |
Cell phones and automotive door handles |
Softest tack-free gasket; appears black on black or clear on metal |
| GA-108 |
Automotive door handles |
Softest gasket with greatest deflection; appears black on black or clear on metal; cures soft and sticky; very good adhesion to Nylon, electroplated nickel, various plastics and metals |
|
|
|
|
ECT, Unit E1, Centrepoint, Rosemount Industrial Estate, Blanchardstown, Dublin 11, Ireland.
T +353 1 8850000 - F +353 1 8236246 - email: info@ect.ie
|
|
|
