| Product |
Applications |
Features |
| 401 |
Crystal assembly; glass furniture bonding; adhering metal brackets to glass |
Excellent adhesion to glass and metal; low viscosity; very good moisture resistance; good for close fitting parts |
| 424A |
Glass bonding; lead crystal chandelier and figurine assembly |
Crystal clear bonds; excellent adhesion to crystal; moderate flowing viscosity |
| 425 |
Glass stemware bonding; fountain assembly |
Dishwasher safe; water clear; low viscosity; exceptional tensile strength; good vibration and impact resistance |
| 429 |
Bulletproof glass bonding; glass, plastic and metal bonding; glass laminating; glass trophy assembly |
Resists yellowing, vibration and thermal shock; optically clear; general purpose bonding, potting and sealing; for large area bonding |
| 488 |
Sealing glass |
Extremely flexible; high degree of moisture resistance; good glass adhesion to difficult to bond to plastics |
| 4-20418 |
Bonding glass to acrylic; mirror assembly |
Cures through UV blocked and tinted glass and plastics; resists yellowing in the sun; good performance during thermal cycling; low stress |
| 4-20586 |
Epoxy for bonding glass to metal and plastic |
Hard, clear bonds; slick surface; resists yellowing when heated; good cure depth |
| 4-20623 |
Gap filling of non-flat, irregular and handmade glass; laminating large, thin glass sheets |
High transmission across the optical spectrum; low stress laminating; Newtonian viscosity minimizes air bubbles in the bond line |
Multi-Cure®
602 Rev A |
Bonding glass to aluminum, steel, plated metal and thermoset plastics; potting |
Cures with heat, light or pre-applied activator; tough, resilient bonds; can be used for coil terminating, unitizing and tamperproofing adjustment screws |
| Multi-Cure® 620 |
Bonding glass to aluminum, steel, plated metal and thermoset plastics; potting |
Good impact and moisture resistance; clear bonds; cures with heat, light or activator; wide range of viscosities; general purpose |
| Multi-Cure® 621 |
Glass/metal bonding to phenolic and filled plastics |
High tensile strength; suited for rigid adhesive applications; clear, hard bonds; cures with UV light, heat or pre-applied activator |
Multi-Cure®
625 SV01 Rev A |
Glass, metal, plastic bonding; adhering plastic lenses to eyeglass frames; bonding leads to glass headlamps and latches to windows |
Flexible and resilient; bonds can withstand strains caused by different coefficients of expansion that can be present when bonding dissimilar substrates; cures with UV light, heat or pre-applied activator |
| 6-20353 |
Glass cationic epoxy and encapsulant |
Clear, rigid bonds; low shrinkage; cures upon exposure to low intensity UV light; good for bonding and coating applications where resilience and toughness are required to resist mechanical and environmental shock |
*Substrate testing for 424A, 4-20263, 4-20651 and Multi-Cure® 619 and 620 has not yet been completed; please contact DYMAX Technical Service for specific recommendations.
