Silicone Encapsulation & Potting Compounds
ACC Silicone Encapsulation & Potting Compounds.
Description:
Suitable for both thin and deep section cure. Potting sensitive components to protect from vibration, high humidity or other harsh environmental conditions. Fast efficient heat transfer from electronic components to heat sinks or outer casings. Protective coatings for pcb's.
Protection for automotive electronics, control boxes, etc. Potting and sealing of cable joint assemblies.
| Product |
Characteristics |
Cure |
Colour |
Pack |
Viscosity |
| Addition cured |
| ACC Q-Sil 550 |
UL94 V-0 tested, reversion resistant, Shore A 55 hard rubber
Q-Sil 550 is a 2-component, silicone elastomer system specially designed for electronic potting applications. It offers good protection against impact damage and can be employed in areas where low flammability is a prerequisite. The cured product is a hard, medium to high modulus, elastomer that can be repaired. The component parts have relatively low viscosities and are readily mixed in a simple 1:1 ratio. |
Addition |
Grey |
2 part |
Low |
| ACC Q-Sil 553 |
UL94 V-0. As Q-Sil 550, higher thermal conductivity, softer rubber |
Addition |
Grey |
2 part |
Liquid |
| Condensation cured |
| ACC SE2005 |
Free flowing, variable cure times, medium hard rubber.
This group of rubbers form a family of products which have been formulated as general purpose, 2 component, silicone rubber encapsulants for electronic assemblies. Each member of this group of products is cured by the addition of a small quantity of its corresponding catalyst. The resulting cured products are relatively hard, resilient rubbers that offer good protection against water and environmental contamination |
Condensation |
White |
2 part |
Low |
| ACC Silcoset 101 |
Shore A 60 hard rubber, with high temperature resistance. Stable up to 250°C, short periods up to 300°C |
Condensation |
Red |
2 part |
Med |
| ACC Q-Sil 12 |
Free flowing compound cures to form soft clear rubber, self bonding |
Condensation |
Clear |
2 part |
Low |
| Optically clear |
| ACC Q-Sil 215 |
Q-Sil 215 is a 2-part, crystal clear, colourless silicone rubber system. It cures at ambient temperature or can be accelerated by heating. The resulting elastomer is a relatively crystal clear, colourless product that can be used to encapsulate sensitive electronic assemblies. 10:1 mix ratio |
Addition |
Clear |
2 part |
Low |
| Thermally conductive |
| ACC SE2003 |
High thermal conductivity, Shore A 80 rubber, reversion resistant |
Addition |
Brick red |
2 part |
Liquid |
| ACC SE2004 |
UL94 V-0 approved, good thermal conductivity. Shore A 55 hard rubber |
Addition |
Pink |
2 part |
High |
| Silicone gels |
| ACC Q-Gel 310 |
General purpose silicone gel. 24h RT cure.
Q-Gel 310 is one of a family of soft, adherent, clear silicone elastomeric gels designed for the encapsulation and protection of electronics components. It is a low viscosity, 2-component system that is readily mixed in a 1:1 ratio. Q-Gel 310 is the softest gel in this group of products. It is used to provide protection from vibration, thermal or mechanical shock. Q-Gel 310 has excellent dielectric properties and also gives excellent protection from water and many environmental contaminants |
Addition |
Clear |
2 part |
V Low |
| ACC Q-Gel 300 |
As Q-Gel 310, higher strength |
Addition |
Clear |
2 part |
V Low |
| ACC Q-Gel 301 |
As Q-Gel 310, higher strength, 60 min RT cure |
Addition |
Clear |
2 part |
V Low |
| ACC Q-Gel 311 |
As Q-Gel 310, 30 min cure, machine dispensed |
Addition |
Clear |
2 part |
V Low |
| ACC Q-Gel 330 |
As Q-Gel 310, low viscosity |
Addition |
Clear |
2 part |
V Low |
| Individual product data sheets and evaluation samples are available upon request. |
Some products are available in convenient twinpacks
| |
|
| Ordering information |
|
| Part number |
Available pack sizes |
| ACC Q-Sil 550 A/B Kit |
250g twinpack, 2kg, 10kg, 40kg |
| ACC Q-Sil 553 A/B Kit |
250g twinpack, 2kg, 10kg, 40kg |
| ACC Silcoset 101 A/B Kit |
1.01kg, 5.05kg, 25.25kg |
| ACC Q-Sil 12 A/B Kit |
1.05kg, 5.25kg, 18.9kg |
| ACC Q-Sil 215 A/B Kit |
1.1kg, 5.5kg, 22kg |
| ACC SE2003 A/B Kit |
2kg, 10kg, 40kg |
| ACC SE2004 A/B Kit |
2kg, 10kg, 40kg |
| ACC Q-Gel 310 A/B Kit |
250g twinpack, 2kg, 10kg, 40kg |
| ACC Q-Gel 300 A/B Kit |
2kg, 10kg, 40kg |
| ACC Q-Gel 301 A/B Kit |
250g twinpack, 2kg, 10kg, 40kg |
| ACC Q-Gel 311 A/B Kit |
2kg, 10kg, 40kg |
| ACC Q-Gel 330 A/B Kit |
2kg, 10kg, 40kg |
| |
|
|
